WHAT IS THE MOST COMMON MOUNTING SPOT FOR THESE HORNS?

TrainHorn™ most common mounting spot is in the engine bay, behind the front bumper, or behind the front grill. For MotoHorn™, we recommend checking out different customer installations on our product page: https://www.motohorn.com/motohorn.

DOES IT FIT ON MY VEHICLE?

Our horns are designed to fit on most vehicles, they are 17.5 x 4.25 in size. We've seen double TrainHorn™ installation on a small Chevrolet Bolt EV and MotoHorn™ has been installed even on sport bikes.

HOW MANY HORNS SHOULD I ORDER?

For passenger cars and motorcycles, 1 is more than loud. We've noticed that many truck owners tend to install 2 or more of these. Installing multiple horns also guarantees a better multi-tone effect and brings up the decibel level. We recommend running TrainHorn™ & MotoHorn™ simultaneously with stock horns if you want more diverse tones.

HOW DO I WIRE IT IN?

You can wire it to the existing stock horn button or under a new switch. We also include a user manual in the package and will email you a digital version of it. It's an easy job and just requires following 5 simple steps.

CAN I SEE USER MANUAL?

Yes, you can find the TrainHorn™ user manual in this link: https://www.motohorn.com/trainhornmanual.
And MotoHorn™ user manual in this link: https://www.motohorn.com/motohornmanual.

DOES THIS HORN DRAIN MY BATTERY/IS MY BATTERY GOOD ENOUGH?

TrainHorn™ & MotoHorn™ does not drain your vehicle battery. Our compressor uses 20A of current only when activated, meaning that there is no constant battery drain and you can use these even with smaller batteries.

IS IT MADE OF PLASTIC?

Our horn trumpets and compressors are made of zinc alloy, it is not the cheap plastic replica you might have seen in different advertisements.

I SAW A SIMILAR HORN FOR $20 ON AMAZON, IS IT THE SAME?

Genuine TrainHorn™ & MotoHorn™ is only sold by MotoHorn.com, the production of this horn costs well above $20 USD. Our horns are made of metal and have twice as powerful compressors. The $20 USD horns you see are made of plastic and their performance is much weaker than ours.

IS THERE A DELAY, DOES IT NEED TO RECHARGE?

There is no delay at all, our compressor is capable of long-lasting blasts, with zero delay. We designed TrainHorn™ & MotoHorn™ in a way that they don't need an air tank, so there is no recharge time.

IF I ORDER 2+ HORNS, DO I CONNECT THEM WITH ONE COMPRESSOR?

Each of our horns comes with a separate compressor and you should install each trumpet with its own compressor. This provides the best possible results.

IS IT WATERPROOF?

TrainHorn™ & MotoHorn™ is weatherproof, meaning that you can use it with rain and other weather conditions, however we don't recommend activating them when the compressor is completely submerged. You should let the compressor dry out if you drive in deep water.

IS IT CORROSION RESISTANT?

Yes, our horns are corrosion resistant and can be also used on boats and different watercraft.

GO TO TRAINHORN™ PRODUCT PAGE →

GO TO MOTOHORN™ PRODUCT PAGE →